Military Tactical Fiber Optic Patch Cable

Our MIL-TAC Military Tactical Fiber Optic Cables are designed for tough outdoor use, offering exceptional strength, lightness, and durability. They serve both military and commercial needs, having undergone rigorous testing and being deployed globally in military data communication. They can be customized to meet your specific application needs with pre-terminated connectors on deployable reels.

Waterproof IP65 LC/UPC 2 Cores Tactical Fiber Optic Patch Cable

Outdoor communication base stations laid in the year-round wet or rain areas are in strong demand for waterproof jumper cables with high waterproof rating and excellent mechanical properties that can match mainstream Nokia, Ericsson, Cisco, Huawei and other communication equipment manufacturers in the outdoor environment, providing stable and reliable signal transmission connections from BBU/DU to RRU/AAU segment base station communication modules. Therefore, non-armor field fiber optic cable with flame retardant and good mechanical properties are pre-terminated IP65 waterproof fiber optic connectors are designed and produced for connecting optical modules or other equipment ports in different modes of BBU/DU.

Waterproof field fiber optic patch cable is mainly composed of ip65 waterproof grade LC fiber optic connectors and non-armor field fiber optic cable, which is made of patch cord principle is to pre-terminate the two ends of a section of fiber optic cable with waterproof fiber optic connectors. Unlike ordinary patch cable fiber optic connectors, the pre-terminated connector on the field cable uses a spiral tail sleeve with a waterproof sealing ring plastic shell. When the LC or SC connector is pre-terminated inside the waterproof connector, the entire waterproof patch cord can be used when paired with the communication base station equipment, simply open the waterproof connector cover, insert the connector into the corresponding equipment hole, and then tighten the waterproof connector shell with internal threads to fasten the equipment end.

The production process of waterproof ip65 patch cable, first, cut the corresponding length of field fiber optic cable, and extract the unit sub-cable from it, then peel off its outer skin and coating layer; then insert the bare fiber into the LC or SC fiber connector filled with fixed glue, through curing, crimping, grinding to complete the termination of the fiber optic cable and connector. However, when the entire field fiber optic cable patch cord is pre-terminated and produced, it is necessary to continue testing the end face of the connector will be dirty, whether the fiber optic cable can transmit signals through the light, whether the loss value of the entire patch cord meets the required standard, and whether the 3D test value meets the standard. When any of the test data is abnormal, the entire finished patch cord needs to be reworked or even re-produced. After all the test parameters meet the required standards, the product will be arranged to be packaged and accompanied by a test report to each for the installation and use of fiber optic cable can understand the performance of the finished product, and can test the entire link network transmission rate.

Feature of Waterproof IP65 LC/UPC 2 Cores Tactical Fiber Optic Patch Cable

  • Waterproof with an IP65 rating.
  • Built with rugged, tight-buffered fiber optic construction for maximum durability, even in harsh conditions like crush, impact, and vehicle runover.
  • Meets rigorous military tactical cable qualification standards.
  • Offers high tensile load capability for strong terminations with military tactical connectors.

Looking for More Fiber Patch Cables Choices?

Are you looking for more choices in fiber patch cables? Check out our LC Fiber Patch Cables, LC LC Fiber Patch Cables and Ruggedised Fiber Patch Cables for smooth networking.

If you can’t find the exact cable you’re looking for, you can easily create your custom fiber optic cables. You have the flexibility to select the cable type, length, connectors, modality, strand count, and jacket type, and we will manufacture it according to your specifications.

Rest assured, our prices are competitive, and we have adaptable minimum order quantities (MOQ).

If you need other help, also feel free to reach out to us, and our support team will guide you in discovering the perfect fiber cable solution to meet your requirements.

Patchcord Type


Fiber Cable DIA (mm)

5.0 or 7.0

Pre-terminated Connector


Connector Endface


Operating Wavelength (nm)


Fiber Type


Pigtails Color


Cable Jacket


Length (m)

From 0.5 to 50

Output Length (m)

From 0.5 to 50

Installation Temperature Range

-40℃ to 70℃ (-40°F to 158°F )

Operation Temperature Range

-40℃ to 85℃ (-22°F to 185°F )

Storage/Transport Temperature Range

-40℃ to 85℃ (-40°F to 185°F )

Insertion Loss (dB)

Typical Values≤0.3; Max Values≤0.35

Mating (times)


Scroll to Top
Contact us