Pre Terminated Fiber Optic Cable

We specialize in pre terminated fiber optic cable.

Endless options
Cost-effective
Time saving
Ready to install

Buy Pre Terminated Fiber Cable Assemblies From Bonelinks!

For a reliable fiber network, get quality pre terminated fiber optic cable assemblies at bonelinks. Explore standard options and components. We also offer fiber patch cables for short distance indoor applications and bulk fiber cables, from Aerial Fiber Optic Cable to Military Tactical Cable for various applications that require field termination. Get your pre terminated fiber cables quote today!

Pre Terminated Fiber Optic Cables with Fiber Type: Single Mode & Multimode

Choose from pre-terminated multimode fiber optic cables: OM1, OM3, OM4, and single-mode OS2. Single Mode fiber gives you a higher transmission rate and up to 50 times more distance than multimode, but it also costs more. Multimode fiber gives you high bandwidth at high speed (10 to 100MBS – Gigabit to 275m to 2km) over medium distances. Choose the fiber type best suited for your application!

OM1: Bonelinks uses 62.5 micron Corning glass in a tight buffer design.
OM3/OM4: Bonelinks utilizes 50 micron Corning glass in a tight buffer design for these multimode options.
OS2: Bonelinks employs 8.3 micron Corning glass in a tight buffer design for single-mode OS2 cables.

Pre Terminated Fiber Cable with Different Outer Jacket: Plenum, Riser, Polyvinyl chloride (PVC) and Armored

Explore Bonelinks’ pre-terminated Plenum, Riser, PVC and Armored fiber optic cables, designed to cater to different fire-code and protection needs.

Plenum: Plenum rated cable meets low-smoke standards, ensuring safe use in plenum ducts according to NFPA regulations.
Riser: Riser (PVC) jackets are suitable for vertical spaces, providing fire resistance for improved safety.
Polyethylene: Cables with Polyethylene jackets are ideal for outdoor applications, offering durability and protection against environmental elements.
Armored: Armored options are available for added protection in various applications, eliminating the need for conduit and maintaining cable flexibility.

Pre Terminated Fiber Optic Cables: Indoor, Indoor/Outdoor, and Outdoor

Bonelinks offers pre-terminated fiber optic cable with outer jackets suitable for indoor-only, indoor and outdoor, or outdoor-only applications.

Indoor cables: Tailored for indoor use, available in both Plenum and Riser (PVC) jackets.
Indoor outdoor cables: Featuring a more robust jacket compared to indoor cables, these cables can run inside conduits directly into buildings, offering protection against water damage and other elements. Available in Plenum to meet low-smoke standards in plenum ducts.
Outdoor cables: Equipped with the most rugged jacket, suitable for conduit, aerial applications, or exterior building installation.

Pre Terminated Cable With Connector Type: ST, SC, LC, FC, MTP/MPO

We offer customized pre-termination for your fiber cables, catering to your specific needs. Choose from a diverse range of connector types, including SC, ST, FC, MTRJ, and MPO/ MTP, LC connectors.

SC: Multi-Mode 62.5 micron and 50 micron, Single-Mode, 10 Gig
ST: Multi-Mode 62.5 micron and 50 micron, Single-Mode, 10 Gig
LC: Multi-Mode 62.5 micron and 50 micron, Single-Mode, 10 Gig
FC: Multi-Mode 62.5 micron and 50 micron, Single-Mode, 10 Gig
MTRJ: Multi-Mode 62.5 micron and 50 micron, Single-Mode, 10 Gig
MTP 12 fiber and up: 10 Gig
Angle Polish (APC) FC: Single-Mode
Angle Polish (APC) SC: Single-Mode

Pre Terminated Fiber Cable Assemblies: Breakout and Fan Out Kit For Extra Protection

Fan-out and breakout kits are essential for terminating large-strand fiber optic cables with delicate 250um bare fibers. These kits add a 900um tight buffer to each fiber, strengthening them for termination.

Fan Out Kits: Convert loose tube bare fibers into connectors-ready tight buffer form using a furcation unit. The 900um tight buffer tubes are secured, preparing fibers for termination.
Breakout Kits: Similar to fan-out kits, breakout kits reinforce fibers with a furcation unit. They include a 3mm diameter jacket with aramid yarn for strength and a heat-shrink tube for strain relief, ensuring durability during termination.

Pulling Eyes Pre Terminated Fiber Optic Cable Assemblies

Pull eyes facilitate easier and safer cable pulling through walls or ceilings. They typically involve adding an extra cable piece to the end, with mesh netting or plastic for connector protection during pulling.

Plastic Pull Eyes: Secure plastic around connectors, attaching a looped cable for easy pulling. Ideal for single cable runs, providing a protective solution during installation.
Mesh Pull Eyes: Similar to plastic pull eyes but reusable for multiple cable pulling jobs. The mesh tube protects connectors during pulling, secured with tape, and utilizes remaining slack to create a reusable “pull eye” at the cable end.

Pre-Terminated Cables In Any Length And Up To 144 High Strand Counts

Order our fiber optic assemblies cut to your exact cable length specifications. Different length of 5m,10m,100m, 300m, 500m cable are available. Choose from a variety of strand counts including 1 (simplex), 2 (duplex), 4, 6, 8, 12, 24, 48 or higher strand count, offering unmatched versatility for custom applications.

Your Trusted Pre Terminated Fiber Optic Cable Supplier

For more than 10 years Bonelinks has been providing customers with high quality preterminated fiber optic cable and fiber cable assemblies.

㎡ production workshop

0 +

production lines

daily capacity pcs pre-terminated connectors

0 +

A supplier provides products,
but we care about your business.

If you do not find pre terminated fiber optic cable that can meet your requirements, please contact us as we might have a solution available.