Optical fiber jumper is an important part of the optical communication system, and the quality of its connector determines the transmission quality of the network. The function of the connector is to precisely butt the two separated optical fiber end faces, so that the optical signal output from the transmitting fiber can be coupled into […]
How to Judge the Performance of Optical Fiber Connector? Read More »
Optical fiber jumper is an indispensable connecting cable in optical fiber wiring. When purchasing optical fiber jumper, we will always see the indicators PC/APC/UPC, such as LC/UPC optical fiber jumper, FC/UPC optical fiber jumper, SC/APC fiber jumper, ST/PC fiber jumper, etc. What does PC/APC/UPC stand for? Does the SFP optical module match with PC/APC/UPC fiber
How to Select PC/APC/UPC Fiber Jumpers for SFP Optical Modules? Read More »
When installing a connector on a fiber end face, return loss is unavoidable, which is caused by the reflection of the light source. Severe light loss can damage the laser light source and interrupt the transmitted signal. In order to allow better contact between the end faces of the two optical fibers, the end faces
MPO fiber patch cord is a hot product in the field of fiber optics. Due to the characteristics of large cores count, small size, and high transmission rate, it has attracted more and more attention, especially in high-density data center wiring solutions, which can exert greater advantages. What is MPO Patch Cord? MPO (Multi-fiber Push
Optical fiber patch cords and pigtails have similar appearances and are rich in variety, but they are not the same fiber optic product. This article will mainly make a comparison between fiber optic patch cords and optical fiber pigtails. What is Fiber Patch Cord? A fiber patch cord is a cable directly connected to a
Fiber Patch Cord VS Pigtail: What are the Differences? Read More »
What is Fiber Patch Cord? Fiber patch cords are often called fiber patch cable, fiber jumper or fiber patch lead. It is a length of fiber cable that is terminated with fiber optic connectors (LC, SC, MTRJ, etc ) at each end. The connectors allow fiber optic patch cords to be rapidly connected to an
When using an optical module, we must consider its wiring problem. How to choose a suitable fiber jumper according to the optical module? 1. Transmission distance and data rate Optical modules have a variety of different transmission rates and transmission distances. When we choose optical fibers for optical modules, we must choose matching optical fiber
How to Choose a Suitable Fiber Optic Jumper according to the Optical Module? Read More »
As we all know, when installing fiber optic patch cord, we should pay attention to the bending range of the cable not being greater than its bending radius, otherwise light leakage will occur and cause loss. As shown in the figure below, the greater the bending range, the greater the loss of optical signals. How
With the popularization of 40G and 100G networks, more and more data centers, telecommunication centers, enterprises and campuses are beginning to use MTP/MPO cabling systems. This cabling system is constructed using MTP/MPO fiber patch cords, MTP/MPO cassettes, MTP/MPO adapters and MTP/MPO adapter panels. It can greatly save network deployment time while providing unlimited possibilities for
How to Build MTP/MPO Cabling System for Different Applications? Read More »
With the continuous development of networks, 40G networks have become common now, and 100G networks are also widely used. At this time, traditional LC cabling can no longer meet the high-speed and high-density requirements of data centers. In this case, it becomes very important to obtain a higher transmission rate and find a suitable solution
Why is MTP/MPO Cassette Crucial in High-density Wiring? Read More »
