Air Blown Micro Cable Unitube

Air blown micro cable is ultra-lightweight in small diameter to be blown into a micro duct. Fiber bundle of this cable is formed by curing optical fiber or fillers into photosensitive resin in a certain arrangement. And outside extruding a special low friction sheath. It is designed for metro feeders or access networks. The micro cable provides a lower initial investment and the flexibility to install and upgrade to the latest fiber technologies.

Air Blown Micro Cable Feature

  • Perfect cable structure with high fiber density
  • Small diameter and lightweight
  • HDPE sheath, enhancing the blowing performance
  • Allowing to blow out and replace with new cables to keep technical superiority
  • Allowing to cut micro ducts anywhere anytime for branches without influences on other cables, saving manholes, hand holes, and cable joints

Air Blown Micro Cable Application

FTTH access cable

Looking for More Air Blown Cable Choices?

Are you looking for more choices in Air Blown fiber optic cables? Check out our Air Blown Fiber Optic Cable for seamless networking. If you need fiber cables that are custom-made for your specific needs, take a look at our Custom Fiber Cables section for personalized connectivity solutions.

Design Properties

__header

Cable Cores

2-288

Fiber per Tube

2-12

Cable Sheath

Polyethylene

Dielectric Strength Member

FRP

Additional Strength Member

Water Blocking Yarn

Loose Tube Diameter

1.4mm(Ā±0.3mm)

Drum length

500m,1000m & 2000m(Ā±3%)

Temperature Range

__header

Installation

-40ā„ƒ to 70ā„ƒ (-40Ā°F to 158Ā°F )

Operation

-30ā„ƒ to 70ā„ƒ (-22Ā°F to 158Ā°F )

Storage/Transport

-40ā„ƒ to 70ā„ƒ (-40Ā°F to 158Ā°F )

Mechanical Properties

__header

Crush Resistance

800 N/100mm

Min. bending radius

Without Tension (10.0ƗODmm); Under Max Tension (20.0ƗODmm)

Scroll to Top
Contact us