Fiber capacity has received increasing attention as the amount of transmitted data has increased dramatically. At the end of the last century, DWDM technology began to be used in trunk communications and rapidly spread. Although the capacity of the DWDM system at that time was only 40 × 2.5G, the number of channels supported by […]
How Does The Shannon Limit Affect Fiber Capacity? Read More »
Fortress base station, the name may be a little scary, let a lot of people have doubts or even think it may be a professional term for online games, but are actually not. The full name of Fortress Base Station is “New Disaster Resistant Fortress Base Station”, which is a reinforced base station specially designed
OTDR (Optical Time Domain Reflectometer) is an important equipment for fiber optic line quality inspection and fault location by using Rayleigh scattering and backscattering generated by Fresnel reflection when light is transmitted in optical fiber. Under the control of precise clock circuit, it transmits optical pulse signals to the optical port according to the set
What Is OTDR And What Are The Precautions For Its Use? Read More »
In recent years, in some of the long-distance trunk lines began to use a new type of G.654E fiber, and achieved better results. The development of communications technology is changing rapidly, fiber optic communications in a single-core capacity also doubled every 3 to 5 years in the rapid growth of speed, but the main types
What Is G.654E Fiber? What Scenarios Is It Suitable For? Read More »
In the fiber optic communication moment affects people’s life nowadays, hanging over our heads on the overhead fiber optic cable can be realized in a moment tens of kilometers of network signal transmission, buried in the underground fiber optic cable backbone network laying, realize the optical fiber to the home, FTTP, FTTB, FTTO and FTTD
Maximum Distance For Data Transmission Over Network Cable The network more understanding of the guys, we all know that twisted pair cable has an “insurmountable””100 meters” transmission distance. Whether it is 10M transmission rate of CAT3 of twisted-pair cable, or 100M transmission rate of CAT5 of twisted-pair cable, and even 1000M transmission rate of CAT6
What Is The Maximum Distance For Data Transmission Over A Network Cable? Read More »
What Is OLT? OLT (Optical Line Terminal), PON network consists of three parts: OLT, ODN and ONU. OLT belongs to the business node side of the access network equipment, connected to the corresponding business node equipment through the SNI interface, to complete the access network service access. In the application of PON technology, OLT equipment
Eye diagram, which is formed by overlapping the waveforms of each code element obtained from the scan due to the afterglow of the oscilloscope. It contains a wealth of information, from the eye diagram can be observed on the impact of inter-code crosstalk and noise, reflecting the overall characteristics of the digital signal, so as
Fiber Optic Bending Overview Fiber optic sensors have a small size, can be curved around the characteristics of the samples can be installed in a narrow space, too small a bending radius will bring optical signal loss, affecting the accuracy of the sensing measurement. However, in many practical application scenarios, fiber optic sensor installation is
Fiber Array (FA) is an array consisting of a bundle of optical fibers or a ribbon of optical fibers mounted on a substrate at specified intervals using a V-Groove substrate. Fiber optic arrays in optical communications mainly include a substrate, a platen, and an optical fiber. Usually, multiple grooves are cut in the base of
