GYFA/S/Y unitube loose tube comes with corrugated steel tape armoring, which is suitable for mining, duct and direct burial application. The outer sheath can be produced with PE, LSZH or flame-retardant materials for specific applications. The loose tube armoured fiber optic cable is using a corrugated steel tape strength member and water-blocking fiberglass yarn around the central uni-tube. This kind of reinforcement makes GYFA/S/Y fibre cable excellent performance on crush, tensile resistance, as well as rodent resistance. Therefore, it is usually used in the most demanding and harsh environments.
Feature
Application
Duct, Direct burial, Backbone communication cabling, Underground mining communications
| Design Properties | __header |
|---|---|
| Cable Cores | 2-144 |
| Fiber in Cable | 2-12 |
| Cable Sheath | Polyethylene |
| Dielectric Strength Member | FRP |
| Additional Strength Member | PE Coated Steel Tape |
| Loose Tube Diameter | 1.8mm(±0.3mm) |
| Drum length | 500m,1000m & 2000m(±3%) |
| Temperature Range | __header |
| Installation | -40℃ to 70℃ (-40°F to 158°F ) |
| Operation | -30℃ to 70℃ (-22°F to 158°F ) |
| Storage/Transport | -40℃ to 70℃ (-40°F to 158°F ) |
| Mechanical Properties | __header |
| Crush Resistance | Short Term (1000 N/100mm); Long Term (2000 N/100mm) |
| Min. bending radius | Without Tension (10.0×ODmm); Under Max Tension (20.0×ODmm) |
MPO Cable
MPO Trunk Cable
MPO Breakout Cable
MPO 8 Fiber Cable
MPO 12 Fiber Cable
MPO 24 Fiber Cable
Fiber Optic Pigtails
SC Fiber Patch Cord
LC Fiber Patch Cord
FC Fiber Patch Cord
ST Fiber Patch Cord
Armored Fiber Patch Cord
Single Mode Fiber Patch Cord
Multimode Fiber Patch Cord
Ruggedised Fibre Patch Leads
Duplex Fiber Patch Lead
Copyright 2023 Bonelinks All Rights Reserved
