Cassette PLC Splitter

Cassette PLC Splitter

Bonelinks provides 1×4; 1×8; 1×16; 1×32 cassette PLC splitter. A 1×4 plug-in plc splitter usually refers to a passive optical communication device that has only one input and four outputs connected, A 1×8 plug-in plc splitter usually refers to a passive optical communication device that has only one input and eight outputs connected, and so as 1×16; 1×32 cassette PLC splitter. Unlike box and steel tube plc splitter, cassette PLC splitters have a built-in package of mini taps with terminated connectors that interact with the outside world through fiber optic adapters at the interface.

First, the chip and FA devices are packaged into the mini-tube; then the single-mode G657 bare fiber at the input and output is protected by a 0.9mm OD protective tube and pre-terminated with an SC, FC or ST fiber connector. Then the mini splitter is placed inside the ABS insert box, and the pre-terminated connector is coupled with the adapter installed on the box, and finally the ABS box is encapsulated and then installed on the splitter box. In general, the box splitter is built-in pre-terminated mini splitter, in the splitter box to use only access to the corresponding fiber optic patch cable can be used. When the connection of the input fiber patch cord length is not enough, it is necessary to lead a certain length of fiber optic cable from the insert splitter internal as a light source signal connection.

All plug-in cassette optical splitters are tested for bare fiber and empty tubes before production. The built-in steel tube splitter is tested for through-light, end-face and split ratio after pre-terminated connectors. When the finished product is produced, each port is tested for attenuation values and all test reports are attached to each product for performance and as confirmation of Bonelinks’ product quality.

Application

Long-Haul Tele/Data Communications;
Fiber Optic Equipment and Systems;
CATV Systems;
Local Area Network, PON, and FTTH;
Fiber Sensors

Related Products

mini plc splitter

Mini PLC Splitter


Splitting ratio: 1x2; 1x4; 1x8; 1x16; 1x32; 1x64
Pre-terminated connector: SC, LC, FC
Fiber type: Singlemode G657A
Operating wavelength(nm): 1260 to 1650
Input length(m): From 0.5/1 to 5
Output length(m): From 0.5/1 to 5
Dimension(mm):55*7*4, 80*20*6 , 120*40*6 or customized
Application: Distribution box, Network cabinet, PON, GPON, FTTx, Rack Mount, Blister Box, Server Room

LGX Box PLC Splitter


Splitting ratio: 1x2; 1x4; 1x8; 1x16; 1x32; 1x64; 1x128
Pre-terminated connector: SC, LC, FC
Fiber type: Singlemode G657A
Operating wavelength(nm): 1310 to 1550
Input length(m): From 0.3 to 10; From 1 to 15;
Output length(m): From 0.3 to 10; From 1 to 15
Dimension(mm):100*80*10; 120*80*10; or customized
Application: PON, GPON, OLT, Rack Mount, Server Room, FTTH, Backbone

Scroll to Top
Contact us